IPS4200 Power Supply Product Details - Innotech Control Systems

Home > Products > Product Search > Product Details > IPS4200 Power Supply

IPS4200 Power Supply

Stand-alone / Miscellaneous

The Innotech Power Supply (IPS4200) is a power regulator that produces a fixed DC voltage output of nominal 12V or 24V at up to 12W.

It is intended for use in switchboards.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Jumper selectable 12VDC or 24VDC output.
Output is fine adjustable.
Visual 'Power Good' indication.
Short circuit protected.
The Innotech enclosure saves space and reducesinstallation time.
Two parallel output terminals for easier wiring.

The Innotech power supply is designed to providepre regulated non isolated DC power for auxiliaryunits, such as transducers and controllers, used inair conditioning control systems.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply:

Recommended Transformer rating: 50VA or greater.
AC or DC input as follows:
- In 12VDC output configuration:
  - 18VDC to 38VDC input
  - 20VAC to 28VAC
- In 24VDC output configuration:
  - 28VDC to 38VDC input
  - 22.5VAC to 28VAC
Maximum DC Power: 12W
Efficiency Typical: 80%

Output Specification:

12VDC @ 1A, adjustable from 10V-14V DC
24VDC @ 0.50A, adjustable from 21V-25V DC
Worst case 130mVRMS ripple on output.

Output Protection:

This power supply is overload protected.
Should the power supply be overloaded or shorted, one or both green 'Power Good' (D1&D6) indicator lights will turn off depending on the condition. Output power to the load is terminated.
To reset the power supply:
- Turn power off.
- Remove the overload condition and disconnect the load.
- Turn power back on. The 'Power Good' indicators should now be lit.
The load can be reconnected.

Temperature Ratings:

Storage-20°C to 70°C non-condensing.
Operating-10°C to 45°C non-condensing.

Enclosure/Mounting:
The Innotech Variable Power Supply is enclosed in a rectangular case made from flame retardant ABS plastic in accordance with IEC695-2-1 (HD444-2-1) as of EN6335-1, A2 and IEC707 (AS/NZS2420) listed under UL94.