M2K11 Micro2000 Controller Product Details

Home > Products > Product Search > Product Details > M2K11 Micro2000 Controller

M2K11 Micro2000 Controller

Stand-alone / Controllers

This product has been superseded.

Replacement Product: M3K04 Micro 3000 Controller

The M2K11 provides complete control of air conditioning systems for Light Commercial and Domestic / Small Apartment applications. The unit can be configured for air cooled or water cooled condenser applications, where a condenser water pump interlock system is required.

No Image Available.

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

LED Display of Temperature and Program functions.
Control Station fits standard electrical wall plates.
Four core screened cable simplifies connection between the control station and controller.
Adjustable Proportional Band, Dead Zone, Compressor Restart Time and Setpoint Range.
Able to operate as 1 cool, 1 electric heating or as reverse cycle heating or cooling.
Three speed Fan Control.
Adjustable Proportional Band, Dead Zone, Compressor Restart Time, Setpoint Range.
Enable or Disable Pump Interlock operation.
All adjustments from the control station.

The M2K11 provides complete control of air conditioning systems for Light Commercial and Domestic / Small Apartment applications. The unit can be configured for air cooled or water cooled condenser applications, where a condenser water pump interlock system is required.

	CE	https://europa.eu/youreurope/business/product/ce-mark/index_en.htm The CE label is a European marking for products to indicate conformity with the electromagnetic compatibility and health and safety requirements set out in European Union.
	C-Tick	https://www.acma.gov.au The C-Tick compliance mark indicates that a device complies with applicable radiocommunications standards.

Power Supply:

Voltage: 240V AC ±10% @ 50/60Hz
Power Consumption: 7VA max

Inputs:

10k ohm thermistor temperature sensor
Digital Input for Switched contact

Outputs:

Relay # 1: Voltage free relay contacts:
- Normally Open - 16 amps resistive
- 6 amps inductive
Relay # 2,3,4: Voltage free relay contacts:
- Normally Open - 10 amps resistive
- 6 amps inductive
Relay # 5: Voltage free relay contacts:
- Normally Open - 2 amps resistive
- 0.5 amps inductive

Connection Between Controller And Control Station:

3 way connection via 2 core plus screen cable.

Control Station Terminal Identification:

1	=	Temperature Sensor input
2	=	Digital Input for Switched Contact
GND	=	For Common of Inputs & Cable Shield
+12V	=	Power from Controller
Comms	=	Comms to Controller
GND	=	Ground from Controller