GenII DIM Product Details - Innotech Control Systems

Home > Products > Product Search > Product Details > GenII DIM

GenII DIM

Digital / Local Expansion Modules

This product has been superseded.

Replacement Product: GenII DI REM

The Innotech GenII DIM Digital Input Module is an expansion device for the Genesis II Digital Controller. The GenII DIM is designed to be located adjacent to the Genesis II Digital Controller and provides four additional digital inputs.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Ribbon connection for Comms between the Genesis II Digital Controller and the GenII DIM.
Four opto isolated 24V AC/DC inputs.
Up to 8 expansion devices per Genesis II Digital Controller.
Program resides on the Genesis II Digital Controller.
Genesis II Digital Controller annunciates loss of COMMS through its internal speaker.
Housed in a low profile din rail mounted enclosure.
JUMPER selectable Address Number.
Inputs are software configurable for normally open or normally closed contact inputs.

Expands Genesis II Digital Controller digital input capability.

Application Notes:
One Genesis II Digital Controller can have up to 8 Local Expansion Modules (LEMs) connected to it.

The 8 LEMs can be made up of any mix of the 3 available types:

GenII AIM - Analogue Input Module
GenII DIM - Digital Input Module
GenII DOM - Digital Output Module

Each expansion module provides 4 extra points providing a maximum of 32 extra points.
NOTE: The inputs on the GenII DIM require 24V AC/ DC to trigger.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply:

Powered from Genesis II Digital Controller via GenII LEM Cable. (The LEM Cable is not supplied with the GenII DIM).

Inputs:

4 opto isolated 24V AC/DC inputs.

Terminal Identification:

A + B = Digital Input 1, 24V AC/DC ±25%.
C + D = Digital Input 2, 24V AC/DC ±25%.
E + F = Digital Input 3, 24V AC/DC ±25%.
G + H = Digital Input 4, 24V AC/DC ±25%.

COMMS Connection:

10 pin keyed plug for GenII LEM Cable (Not included).

Temperature Ratings:

Storage 0 to 50°C non-condensing.
Operating 0 to 40°C non-condensing.

Enclosure:

The GenII Local Expansion Modules are housed in rectangular cases made from flame resistant Astrene M650 IR plastic in accordance with IEC695-2-1 (HD444- 2-1) as of EN6335-1, A2 and IEC707 (AS/NZS2420).
Colour: Grey
DIN Rail mounted.