GenII DOM Product Details - Innotech Control Systems

Home > Products > Product Search > Product Details > GenII DOM

GenII DOM

Digital / Local Expansion Modules

This product has been superseded.

Replacement Product: GenII DO REM

The Innotech GenII DOM Digital Output Module is an expansion device for the Genesis II Digital Controller. The GenII DOM is designed to be located adjacent to the Genesis II Digital Controller and provides four additional digital outputs.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Four relay outputs.
LED indication of relay status.
Ribbon connection for Comms between the Genesis II Digital Controller and the GenII DOM.
Up to 8 expansion devices per Genesis II Digital Controller.
Program resides on the Genesis II Digital Controller.
Genesis II Digital Controller annunciates loss of COMMS through its internal speaker.
Housed in a low profile din rail mounted enclosure.
JUMPER selectable Address Number.
Outputs are software configurable for normally energised or normally de-energised operation (e.g. fail safe).

Expands Genesis II Digital Controller digital output capability.

Application Notes:
The Genesis II Digital Controller can have up to 8 Local Expansion Modules (LEMs) connected to it.

The 8 LEMs can be made up of any mix of the 3 available types:

GenII AIM - Analogue Input Module
GenII DIM - Digital Input Module
GenII DOM - Digital Output Module

Each expansion module provides 4 extra points providing a maximum of 32 extra points.

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply:

Voltage: 24 Volts ± 10 % @ 50/60 Hz.
Power Consumption: 3VA Max.

Outputs::

One SPDT voltage free contact per stage. 240V/2 Amp Max.

Terminal Identification:

1 = 24V AC Supply.
2 = OV AC.
3 = No Connection

NOTE: The GenII DOM MUST be powered from the same transformer as the Genesis II Digital Controller. The operating voltage must meet the requirements of Safety Extra Low Voltage (SELV) to EN60730.

A = Normally Open Relay 1.
B = Normally Closed Relay 1.
C = Common Relay 1 & 2.
D = Normally Open Relay 2.
E = Normally Closed Relay 2.
F = Normally Open Relay 3.
G = Normally Closed Relay 3.
H = Common Relay 3 & 4.
I = Normally Open Relay 4.
J = Normally Closed Relay4.

COMMS Connection:

10 pin keyed plug for GenII LEM Cable (Not included).

Temperature Ratings:

Storage 0 to 50°C non-condensing.
Operating 0 to 40°C non-condensing.

Enclosure:

The GenII Local Expansion Modules are housed in rectangular cases made from flame resistant Astrene M650 IR plastic in accordance with IEC695-2-1 (HD444- 2-1) as of EN6335-1, A2 and IEC707 (AS/NZS2420).
Colour: Grey
DIN Rail mounted.