MP01 Maxim Miniport Network Display Product Details

Home > Products > Product Search > Product Details > MP01 Maxim Miniport Network Display

MP01 Maxim Miniport Network Display

Digital / Network Displays

This product has been discontinued.

Do you need help finding a replacement product? Contact Us
Email: sales@innotech.com
Phone: +61 7 3421 9100

The MP01 Maxim Miniport is a network device that allows a user to externally access the Human Machine Interface (HMI) of a Maxim Series Controller installed on the network. The Maxim Miniport can be used to locate and log on to any controller on the network using the Net Comms connection.

The MP01 Maxim Miniport is designed for surface mounting and allows easy access to networked controllers that are located in remote or inaccessible areas.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

Access up to 40 networked Maxim Controllers at one time
Search up to 40 controllers at one time, within a device address range of 1-99
Access to up to 62 Sub Network devices per Sub System Gateway on Primary Network
4 line, 80 character backlit Liquid Crystal Display (LCD)
1 x RS485 serial communications port for Net Comms
1 x RS485 serial communications port for Global Comms
Supports Maxim Controllers that incorporate Net Comms
Network Display Mode
Network Searching Facilities
Can detect and identify Genesis Controllers on the Network
User programmable baud rates
User programmable sleep timeout
Select button allows user to connect and disconnect from an individual Maxim Controller
Convenient reconnect function
Flash ROM for in-system firmware upgrades
Operates on 24 V AC or 24 V DC
9600, 57600, and 115200 baud comms rate

The Maxim Miniport can be used in a variety of situations. Its main advantage is allowing easy access to a number of controllers from a single point. This enables the user to access a controller without requiring physical access to the chosen controller.

A single point of access to a Maxim Controller network
Mounted on panel doors to give easy access to a group of Maxim Controllers within the control panel
Hand held Service Tool
Wall mounted device
Used as a monitoring device

	CE	https://europa.eu/youreurope/business/product/ce-mark/index_en.htm The CE label is a European marking for products to indicate conformity with the electromagnetic compatibility and health and safety requirements set out in European Union.
	FCC	https://www.fcc.gov FCC marking indicates that the product conforms with the regulations of the U.S. Federal Communications Commission (FCC) for microprocessor-based equipment.
	RCM	https://www.acma.gov.au The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.
	UL	https://www.ul.com UL marking for USA and Canada indicates that the product conforms with the safety standards laid down by Underwriters Laboratories.

Power Supply

24 V AC ± 10% @ 50/60Hz
24 V DC ± 10%
Power Consumption: 1.5W Max.

The operating voltage must meet the requirements of Safety Extra Low Voltage (SELV) to EN60730. The transformer used must be a Class 2 safety transformer that has the energy and voltage limiting characteristics as described in the National Electrical Code, ANSI/ NFPA70. It must also be sized and fused in compliance with local safety regulations.

Temperature Ratings

Storage: 0 to 50°C non-condensing.
Operating: 0 to 40°C non-condensing.

Terminal Identification:
Power Supply

24V Supply
0V Supply
EARTH

Terminal 3 Note: This connection is to protect the communication circuitry, and must be connected to a good clean EARTH. It should NOT be connected to terminal 2.

Comms Connection

SHLD1	=	Shield from incoming AND to outgoing comms
+	=	RS 485 (+) signal
-	=	RS 485 (-) signal

Enclosure & Mounting
The Maxim Miniport MP01 is housed in a HDM™ or Clipsal™ style switch plate enclosure, and is moulded from flame retardant plastics recognised by UL as UL 94-V0.

Colour: White
Dimensions (max): (W) 117mm x (H) 72mm x (D) 28mm