ICS02 Control Station Product Details - Innotech Control Systems

Home > Products > Product Search > Product Details > ICS02 Control Station

ICS02 Control Station

Digital / Network Displays

This product has been discontinued.

Do you need help finding a replacement product? Contact Us
Email: sales@innotech.com
Phone: +61 7 3421 9100

ICS01 ON/OFF, Set Point
ICS02 ON/OFF, Set Point and 3 Speed Fan

The ICS series Control Stations form part of the Maxim & Genesis Direct Digital Controller range and provide a simple unitary Human Machine Interface (HMI). The HMI offers on/off, setpoint and fan speed control. The HMI is powered by 24VAC and connects directly to the Globals Comms network.

Each ICS can communicate with a designated controller on the network. The ICS units are configured via the Keypad, are compatible with most existing Innotech digital products and are capable of operating at both fast or slow comms.

The interface to the controller is via global Transmit and receive blocks, the configuration simply uses the ICS address to form part of the unique point name.

(Larger image)

Download Datasheet Contact Us

FeaturesApplicationsApprovals & ListingsTech SpecsDownloadsHow To Buy

One numerical value input
One numerical value output
One momentary push button digital input
One LED indication digital output
One fan speed input (ICS02 only)
Housed in a switchplate that mounts in standard electrical wall plates
Isolated RS485 interconnection between Innotech Controllers
Adjustable user input range
Adjustable decimal place
Configurable power on settings

The Innotech Control Station extends the capabilities of Innotech controllers by providing a numerical value output, numerical value input, push button digital input and a single LED display output for distributed control via RS485.

The Innotech Control Station provides a visual display of a control value and a means to set a parameter. It is not intended for use on a large controller network as this affects the operation.

Models

Feature	ICS01	ICS02
On/Off	Yes	Yes
Temp. Display	Yes	Yes
Setpoint Adjust	Yes	Yes
Run Status	Yes	Yes
Fan Speed	No	Yes

RCM

https://www.acma.gov.au

The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.

Power Supply

Voltage: 24 volts AC ±10% @ 50/60Hz.
Power Consumption: 3VA max.

Inputs

Push buttons for adjusting control values.
Push button for momentary input of “digital function”.

Outputs

No physical outputs.
Display of Temperature and Setpoint.

Terminal Identification

1 = 24 V AC Supply.
2 = 0 V AC Supply.
3 = Earth.

NOTE - TERMINAL 3 is for the protection of the Comms circuitry and must be connected to a good electrical bonded Earth.

COMMS Connection

S1	=	Shield from incoming Comms Cable.
+	=	RS485 (+) signal.
-	=	RS485 (-) signal.
S2	=	Shield from outgoing Comms Cable. Do not connect. Only used on REM Networks