Digital / Controllers
Go to the Omni Spotlight page to learn more about Omni.The Innotech Omni generation of BEMS Controllers are state of the art digital processing systems suitable for various types of control applications typically found in building management and process control.High speed data processing technology, customisable multi protocol communication interfaces, combined with a fully user configurable input/output interface for field device connectivity allows for out-of- the-box project flexibility.Omni's Programmable Points (UI/O) can be used universally as inputs or outputs.Each Omni controller supports various industry standard protocols with enhanced capabilities including routing between networks and protocols.Additional protocol and communications interfaces are supported via Omni Expansion Bay Modules.Each controller has a feature rich embedded webpage providing user level controlled access to the device system configuration including, real time monitoring and trending, graphing, diagnostics, alarm status, log extraction and scheduling functions.The optional Human Machine Interface (HMI) can be ordered with the Omni BEMS Controller or used externally via various mediums. The HMI is customisable during the configuration process and can display relevant live information as well as providing access to system settings.Easily accessible USB ports off er a fast localised configuration interface and access to logged data.Omni controllers are fully programmable via the Innotech Focus graphical programming interface.Models:OMC40: 40 Programmable Points OMC20: 20 Programmable Points OMC14: 14 Programmable Points OMC40D: 40 Programmable Points with DisplayOMC20D: 20 Programmable Points with DisplayOMC14D: 14 Programmable Points with Display
The Innotech Omni generation of BEMS Controllers are state of the art digital processing systems suitable for various types of control applications typically found in building management and process control.
High speed data processing technology, customisable multi protocol communication interfaces, combined with a fully user configurable input/output interface for field device connectivity allows for out-of- the-box project flexibility.
Omni's Programmable Points (UI/O) can be used universally as inputs or outputs.
Each Omni controller supports various industry standard protocols with enhanced capabilities including routing between networks and protocols.
Additional protocol and communications interfaces are supported via Omni Expansion Bay Modules.
Each controller has a feature rich embedded webpage providing user level controlled access to the device system configuration including, real time monitoring and trending, graphing, diagnostics, alarm status, log extraction and scheduling functions.
The optional Human Machine Interface (HMI) can be ordered with the Omni BEMS Controller or used externally via various mediums. The HMI is customisable during the configuration process and can display relevant live information as well as providing access to system settings.
Easily accessible USB ports off er a fast localised configuration interface and access to logged data.
Omni controllers are fully programmable via the Innotech Focus graphical programming interface.
Omni BEMS Controllers offer a large array of programmable points to monitor and control all types of external plant and equipment.
Omni BEMS Controllers are ideal for HVAC, Building and Energy Management, automation as well as process control.
The creation of control strategies is made simple with the Focus engineering soft ware. With it's powerful graphical programming interface, Focus allows the user to create a project-wide control strategy.
Typical applications include:
BTL (BACnet Testing Laboratory). The devices listed were tested by a recognised BACnet Testing Laboratory.
The CE label is a European marking for products to indicate conformity with the electromagnetic compatibility and health and safety requirements set out in European Union.
FCC marking indicates that the product conforms with the regulations of the U.S. Federal Communications Commission (FCC) for microprocessor-based equipment.
The RCM compliance mark indicates that a device complies with applicable radiocommunication and electrical safety standards.
UL marking for USA and Canada indicates that the product conforms with the safety standards laid down by Underwriters Laboratories.
Caution: The real-time clock battery is user replaceable but should only be replaced by qualified Innotech service technicians. The battery is located in the expansion bay on all models.
The MicroSD card also contains PDF documents. For the latest documents, visit www.innotech.com.au.
The optional on-board HMI module can only be installed by qualified Innotech service technicians.
The operating voltage must meet the requirements of Safety Extra Low Voltage (SELV) to EN60730. The transformer used must be a class 2 safety transformer in compliance with EN60742 and be designed for 100% duty. It must also be sized and fused in compliance with local safety regulations.
The Omni Web-Server allows access to user programmed variables, schedules, system settings, log data (with export function), alarms, access control and real-time configuration monitoring and trends.
To access the web-server, enter the IP address of the Omni Controller in your web browser, ensuring your device is on the same range.
The Omni Web-Server uses HTML5 and requires no additional plugins, ensuring compatibility across multiple web browsers.
Refer to the Omni User Instructions.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
Note – This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Modifications to this device, may void the authority granted to the user by the FCC to operate this equipment.
The software on this product may contain copyright protected software which is licensed under various open source licenses.
Copies of the corresponding licenses:
You may obtain the corresponding source code for the open source licenses and other related data used within this product by sending us an email at opensource@innotech.com.au. This offer is valid for a period of 3 years after our last shipment of this product, and is available to anyone in receipt of this information. Please include the product model number, system version information and the corresponding license you are enquiring about.
View our distributor list
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.